[Free] 2019(Nov) EnsurePass Microsoft 70-741 Dumps with VCE and PDF 81-90

Get Full Version of the Exam
http://www.EnsurePass.com/70-741.html

Question No.81

You have a DHCP server named Server1 that runs Windows Server 2016. You have a single IP subnet.

Server1 has an IPv4 scope named Scope1. Scope1 has an IP address range of 10.0.1.10 to

10.0.1.200 and a length of 24 bits.

You need to create a second logical IP network on the subnet. The subnet will use an IP address range of 10.0.2.10 to 10.0.2.200 and a length of 24 bits.

What should you do?

  1. Create a second scope, and then create a superscope.

  2. Create a superscope, and then configure an exclusion range in Scope1.

  3. Create a new scope, and then modify the IPv4 bindings.

  4. Create a second scope, and then run the DHCP Split-Scope Configuration Wizard.

Correct Answer: A

Question No.82

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have a Hyper-V host named Server1 that hosts a virtual machine named VM1. Server1 and VM1 run Windows Server 2016.

The settings for VM1 are configured as shown in the exhibit below.

image

You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1. Solution: You need to enable the Data Exchange integration service for VM1.

Does this meet the goal?

  1. YES

  2. NO

Correct Answer: B

Question No.83

HOTSPOT

You have a Hyper-V host named Server1 that runs Windows Server 2016. Server 1 has a virtual switch Switch1.

Server1 hosts the virtual machines configured as shown in the following table.

image

Windows firewall on VM1 and VM2 is configured to allow ICMP traffic. VM1 and VM2 connect to Switch1.

You fail to ping VM1 from VM2.

You need to view the VirtualSubnetid to which VM1 connects. Which cmdlet should you run on Server1?

image

Correct Answer:

image

Question No.84

Your network contains an Active directory forest named contoso.com. The forest has a Distributed File System (DFS) namespace named \\contoso.com\namespace1.

The domain contains a file server named Server1 that runs Windows Server 2016. You create a folder named Folder1 on Server1.

Which two cmdlets should you use? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

  1. New-DfsnFolderTarget

  2. Install-WindowsFeature

  3. Grant-DfsnAccess

  4. New-DfsnFolder

  5. New-SmbShare

Correct Answer: BC

Question No.85

Your network contains three subnets, a production subnet that contains production servers, a development network that contains development servers, and a client network that contains client computers.

The development network is used to test applications and reproduces servers that are located on the production network. The development network and the production network use the same IP address range.

A developer has a client computer on the client network. The developer reports that when he attempts to connect to the IP address 10.10.1.6 from his computer, he connects to a server on the production network.

You need to ensure that when the developer connects to 10.10.1.6, he connects to a sever on the development network.

Which cmdlet should you use?

  1. New-NetNeighbor

  2. New-NetRoute

  3. Set-NetTcpSetting

  4. Set-NetNeighbir

Correct Answer: B

Question No.86

HOTSPOT

You have a DNS server named Server1.

The forwarders are configured as shown in the Forwarders exhibit. (Click the Exhibit button.)

image

The Advanced Settings are configured as shown in the Advanced exhibit. (Click the Exhibit button.)

image

The Root Hints are configured as shown in the Root Hints exhibit. (Click the Exhibit button.)

image

Server1 does not contain any DNS zones.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

image

Correct Answer:

image

Question No.87

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1. All client computers run Windows 10 and are configured as DHCP clients.

Your helpdesk received calls today from users who failed to access the network from their Windows 10 computer.

You open the DHCP console as shown in the exhibit. (Click the Exhibit button.)

image

You need to ensure that all of the Windows 10 computers can receive a DHCP lease.

Solution: You start the DHCP Server service. Does this meet the goal?

  1. Yes

  2. No

Correct Answer: B

Explanation:

https://technet.microsoft.com/en-us/library/dd183581(v=ws.10).aspx

Question No.88

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

Your network contains an Active Directory domain named contoso.com

You need to create a Nano Server image named Nano1 that will be used as a virtualization host. The windows server 2016 source files are located in drive D.

Solution: You run the following cmdlet.

New-NanoServerImage -Edition Datacenter -DeploymentType Host -Package Mictosoft- NanoServer-SCVMM-Package -MediaPath `D:\ -TargetPath C:\nano1\Nano1.wim – ComputerName Nano1 -Domaintiame Contoso.com

Does this meet the goal?

  1. Yes

  2. NO

Correct Answer: A

Question No.89

You have a server named Server1 that runs Windows Server 2016. Server1 has the following routing table. What will occur when Server1 attempts to connect to a host that has an IP address of 172.20.10.50?

image

  1. Server1 will attempt to connect directly to 172.20.10.50.

  2. Server1 will route the connection to 10.10.0.2.

  3. Server1 will silently drop the connection attempt.

  4. Server1 will route the connection to 192.168.2.1.

Correct Answer: D

Explanation:

http://www.techrepublic.com/article/understanding-routing-tables/

Question No.90

HOTSPOT

Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016.

Server1 has Microsoft System Center 2016 Virtual Machine Manager (VMM) installed. Server2 has IP Address Management (IPAM) installed.

You create a domain user named User1.

You need to integrate IPAM and VMM. VMM must use the account of User1 to manage IPAM. The solution must use the principle of least privilege.

What should you do on each server?

To answer, select the appropriate options in the answer area.

image

Correct Answer:

image

Get Full Version of the Exam
70-741 Dumps
70-741 VCE and PDF

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.