[Free] 2019(Nov) EnsurePass Microsoft 70-743 Dumps with VCE and PDF 41-50

Get Full Version of the Exam
http://www.EnsurePass.com/70-743.html

Question No.41

HOTSPOT

You have a server named Server1 that runs Windows Server 2016. Server1 has the Web Application Proxy role service installed.

You publish an application named App1 by using the Web Application Proxy.

You need to change the URL that users use to connect to App1 when they work remotely. Which command should you run?

To answer, select the appropriate options in the answer area.

image

Correct Answer:

image

Question No.42

You have a server named Server1.

You enable BitLocker Drive Encryption (BitLocker) on Server1.

You need to change the password for the Trusted Platform Module (TPM) chip. What should you run on Server1?

  1. Initialize-Tpm

  2. Import-TpmOwnerAuth

  3. repair-bde.exe

  4. bdehdcfg-exe

Correct Answer: B

Question No.43

Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have a Hyper-V host named Server1 that runs Windows Server 2016. You plan to deploy several shielded virtual machines on Server1.

You deploy a Host Guardian on a new server.

You need to ensure that Server1 can host shielded virtual machines. What should you do first?

  1. the Mount-VHD cmdlet

  2. the Diskpart command

  3. the Set-VHD cmdlet

  4. the Set-VM cmdlet

  5. the Set-VMHost cmdlet

  6. the Set-VMProcessor cmdlet

  7. the Install-WindowsFeature cmdlet

  8. the Optimize-VHD cmdlet

Correct Answer: G

Explanation:

Installing Host Guardian Service (HGS) Role

On a machine running Windows Server 2016, install the Host Guardian Service role using Server Manager or Windows PowerShell.

From the command line issue the following command:

Install-WindowsFeature HostGuardianServiceRole -IncludeManagementTools

References: https://blogs.technet.microsoft.com/datacentersecurity/2016/03/16/windows-server- 2016-and-host-guardian-service-for-shielded-vms/

Question No.44

You have a server named Server1 that runs Windows Server 2016. You need to install the DNS Server role on Server1.

What should you run?

  1. the Install-Package cmdlet

  2. the setup.exe command

  3. the dnscmd.exe command

  4. the Enable-WindowsOptionalFeature cmdlet

Correct Answer: D

Question No.45

HOTSPOT

Your company has a main office and a branch office. The two offices connect to each other by using a WAN link.

Your network contains an Active Directory forest named contoso.com. The forest contains a domain controller named DC1. All of the domain controllers are located in the main office.

You install a read-only domain controller (RODC) named RODC1 in the branch office.

You create a user account for a new user named User1. You add User1 to the Allowed RODC Password Replication Group. User1 starts work on Monday.

You are notified that the WAN link will be down for maintenance on Monday. You need to ensure that User1 can log on in the branch office site on Monday. Which command should you run?

To answer, select the appropriate options in the answer area.

image

Correct Answer:

image

Question No.46

You deploy a Hyper-V server named Server1 in an isolated test environment. The test environment is prevented from accessing the Internet. Server1 runs the Datacenter edition of Windows Server 2016.

You plan to deploy the following guest virtual machines on the server:

image

Which activation model should you use for the virtual machines?

  1. Multiple Activation Key (MAK)

  2. Key Management Service (KMS)

  3. Original Equipment Manufacturer (OEM) key

  4. Automatic Virtual Machine Activation (AVMA)

Correct Answer: D

Question No.47

You have a server that runs Windows Server 2016.

The server contains a storage pool named Pool1. Pool1 contains five physical disks named Disk1, Disk2, Disk3, Disk4, and Disk5.

A virtual disk named VirtualDisk1 is stored in Pool1. VirtualDisk1 uses the parity storage layout.

Disk3 fails.

You need to remove Disk3 from Pool1.

Which two commands should you run? Each correct answer presents part of the solution.

  1. Update-StoragePool -FriendlyName Pool1

  2. Set-ResiliencySetting -StoragePool Pool1 -PhysicalDiskRedundancyDefault 4

  3. Reset-PhysicalDisk -FriendlyName Disk3

  4. Remove-PhysicalDisk -FriendlyName Disk3

  5. Set-PhysicalDisk -FriendlyName Disk3 -Usage Retired

Correct Answer: DE

Question No.48

You deploy two servers that run Windows Server 2016. You install the Failovers Clustering feature on both servers. You need to create a workgroup cluster.

What should you do?

  1. Create matching local administrative accounts on both of the servers. Assign the same primary DNS suffix to both of the servers. Run the New-Cluster cmdlet and specify an administrative access point of None.

  2. Configure both of the server to be in a workgroup named Workgroup. Configure the Cluster Service to log on as Network Service. Run the New-Cluster cmdlet and specify an administrative access point of DNS.

  3. Create matching local administrative accounts on both of the servers. Assign the same primary DNS suffix to both of the servers. Run the New-Cluster cmdlet and specify an administrative access point of DNS.

  4. Configure both of the server to be in a workgroup named Workgroup. Configure the Cluster Service to log on as Network Service. Run the New-Cluster cmdlet and specify an administrative access point of None.

Correct Answer: D

Question No.49

You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host that hosts a virtual machine named VM1.

Server1 has three network adapter cards that are connected to virtual switches named vSwitch1, vSwitch2 and vSwitch3.

You configure NIC Teaming on VM1 as shown in the exhibit. (Click the Exhibit button.)

image

You need to ensure that VM1 will retain access to the network if a physical network adapter card fails on Server1.

What should you do?

  1. From the properties of the NIC team on VM1, change the load balancing of the NIC team.

  2. From Hyper-V Manager on Server1, modify the settings of VM1.

  3. From Windows PowerShell on Server1, run the Set- VmNetworkAdapterFailoverConfigurationcmdlet.

  4. From Hyper-V Manager on Server1, modify the properties of vSwitch1.

Correct Answer: B

Explanation:

You can configure NIC teaming in the Guest OS; however, before NIC teaming will work in a virtual machine, you need to enable NIC teaming in the Advanced Features section of the VM settings.

Question No.50

You have two Hyper-V hosts named Server1 and Server2 that run windows server 2012 R2. The servers are nodes in a failover cluster named Cluster1.

You perform a rolling upgrade of the cluster nodes to Windows Server 2016.

You need to ensure that you can implement the Virtual Machine Load Balancing feature. Which cmdlet should you use?

  1. Update-ClusterFunctionalLevel

  2. SetCauClusterRole

  3. Update-ClusterNetWorkNameResource

  4. Set-ClusterGroupSet

Correct Answer: A

Get Full Version of the Exam
70-743 Dumps
70-743 VCE and PDF

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.