[Free] 2019(Nov) EnsurePass Microsoft 70-743 Dumps with VCE and PDF 61-70

Get Full Version of the Exam
http://www.EnsurePass.com/70-743.html

Question No.61

Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have a two-node Hyper-V cluster named Cluster1. A virtual machine named VM1 runs on Cluster1.

You need to configure monitoring of VM1. The solution must move VM1 to a different node if the Print Spooler service on VM1 stops unexpectedly.

Which tool should you use?

  1. the clussvc.exe command

  2. the cluster.exe command

  3. the Computer Management snap-in

  4. the configurehyperv.exe command

  5. the Disk Management snap-in

  6. the Failover Cluster Manager snap-in

  7. the Hyper-V Manager snap-in

  8. the Server Manager app

Correct Answer: F

Question No.62

Note: This question is part of a series of questions that use the same scenario. For your

convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.

Start of repeated scenario

Your network contains an Active Directory domain named contoso.com. The functional level of the forest and the domain is Windows Server 2008 R2. All servers in the domain run Windows Server 2016 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10.

The domain contains nine servers that are configured as shown in the following table.

image

The virtual machines are configured as follows:

image

Each virtual machine has one virtual network adapter.

image

VM1 and VM2 are part of a Network Load Balancing (NLB) cluster.

image

All of the servers on the network can communicate with all of the virtual machines.

End of repeated scenario.

You create a new NLB cluster that contains VM3.

You need to ensure that VM2 can remain in the original cluster and be added to the new cluster. What should you do first?

  1. Add a new virtual network adapter to VM2.

  2. Install the Web Application Proxy server role on VM2 and VM3.

  3. Change the cluster operation mode.

  4. Modify the default port rule.

Correct Answer: A

Question No.63 HOTSPOT

You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 connects to your corporate network. The Corporate network uses the 10.10.0.0/16 address space.

Server1 hosts a virtual machine named VM1, VM1 is configured to have an IP addresses of 172.16.1.54/16.

You need to ensure that VM1 can access the resources on the corporate network. What should you do?

To answer, select the appropriate options in the answer area.

image

Correct Answer:

image

Question No.64

HOTSPOT

Your network contains an Active Directory forest named contoso.com. The forest has three sites named Site1, Site2 and Site3.

Distributed File System (DFS) for the forest is configured as shown in the exhibit.

image

The forest contains a server named Server2 that hosts the DFS namespace.

\\Contoso.com\Namespace1\Folder2 has the following configuration.

image

\\Contoso\Namespace1\Folder2 has the targets configured as shown in the following table.

image

For each of the following statement, Select Yes if Statement is true. Otherwise , select No.

image

Correct Answer:

image

Question No.65

HOTSPOT

Your network contains an Active Directory domain named contoso.com. The domain contains three servers named Server1, Server2, and Server3 that run Windows Server 2016.

Server1 has IP Address Management (IPAM) installed. Server2 and Server3 have the DHCP Server role installed and have several DHCP scopes configured. The IPAM server retrieves data from Server2 and Server3.

A domain user named User1 is a member of the groups shown in the following table.

image

On Server1, you create a security policy for User1. The policy grants the IPAM DHCP Scope Administrator Role with the \Global access scope to the user.

Which actions can User1 perform?

To answer, select the appropriate options in the answer area.

image

Correct Answer:

image

Question No.66

You have a server named Server1 that runs Windows Server 2016. You install the Docker daemon on Server1.

You need to configure the Docker daemon to accept connections only on TCP port 64500. What should you do?

  1. Edit the configuration.json file.

  2. Run the Set-ServiceWindows PowerShell cmdlet.

  3. Edit the daemon.json file.

  4. Modify the routing table on Server1.

Correct Answer: C

Explanation:

Configure Docker with Configuration File

The preferred method for configuring the Docker Engine on Windows is using aconfiguration file. The configuration file can be found at #39;c:\ProgramData\docker\config\daemon.json#39;.

Only the desired configuration changes need to be added to the configuration file. For example, this sample configures the Docker Engine to accept incoming connections onport 64500. All other configuration options will use default values.

{

quot;hostsquot;: [quot;tcp://0.0.0.0:64500quot;]

}

References: https://msdn.microsoft.com/en- us/virtualization/windowscontainers/docker/configure_docker_daemon

Question No.67

You have multiple servers that run Windows Server 2016 and are configured as VPN servers. You deploy a server named NPS1 that has Network Policy Server (NPS) installed.

You need to configure NPS1 to accept authentication requests from the VPN servers. What should you configure on NPS1?

  1. From RADIUS Clients and Servers, add a remote RADIUS server group.

  2. From Policies, add a connection request policy.

  3. From Policies, add a network policy.

  4. From RADIUS Clients and Servers, add RADIUS clients.

Correct Answer: D

Question No.68

You plan to deploy several Hyper-V hosts that run Windows Server 2016. The deployment will use Software defined Networking (SDN) and VXLAN. Which server role should you install on the network to support the planned deployment?

  1. Network Controller

  2. Network Policy and Access Services

  3. Remote Access

  4. Host Guardian Service

Correct Answer: D

Question No.69

Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have a two-node Hyper-V cluster named Cluster1 at a primary location and a stand- alone Hyper-V host named Server1 at a secondary location.

A virtual machine named VM1 runs on Cluster1. You configure a Hyper-V Replica of VM1 to Server1. You need to perform a Test Failover of VM1.

Which tool should you use?

  1. the clussvc.exe command

  2. the cluster.exe command

  3. the Computer Management snap-in

  4. the configurehyperv.exe command

  5. the Disk Management snap-in

  6. the Failover Cluster Manager snap-in

  7. the Hyper-V Manager snap-in

  8. the Server Manager app

Correct Answer: G

Question No.70

HOTSPOT

Your network contains an Active Directory forest. The forest contains two sites named Site1 and Site2. Site1 contains 10 domain controllers. Site1 and Site2 connect to each other by using a WAN link.

You run the Active Directory Domain Services Configuration Wizard as shown in the following graphic.

image

Server3 is the only server in Site2.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

image

Correct Answer:

image

Get Full Version of the Exam
70-743 Dumps
70-743 VCE and PDF

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.