[Free] 2019(Nov) EnsurePass Microsoft 70-743 Dumps with VCE and PDF 71-80

Get Full Version of the Exam
http://www.EnsurePass.com/70-743.html

Question No.71

You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host that hosts a virtual machine named VM1.

Server1 has three network adapter cards that are connected to virtual switches named vSwitch1, vSwitch2 and vSwitch3.

You configure NIC Teaming on VM1 as shown in the exhibit. (Click the Exhibit button.)

image

You need to ensure that VM1 will retain access to the network if a physical network adapter card fails on Server1.

What should you do?

  1. From Windows PowerShell on VM1, run the Set-VmNetworkAdapterTeamMapping cmdlet.

  2. From Windows PowerShell on Server1, run the Set-VmNetworkAdapter cmdlet.

  3. From Windows PowerShell on Server1, run the Set-VmSwitch cmdlet.

  4. From Windows PowerShell on Server1, run the Set- VmNetworkAdapterFailoverConfiguration cmdlet

Correct Answer: A

Question No.72

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2016. All domain controllers run Windows Server 2012 R2.

Contoso.com has the following configuration:

image

You plan to deploy an Active Directory Federation Services (AD FS) farm on Server1 and to configure device registration.

You need to configure Active Directory to support the planned deployment. Solution: You upgrade a domain controller to Windows Server 2016.

Does this meet the goal?

  1. Yes

  2. No

Correct Answer: B

Explanation:

Device registration requires a forest functional level of Windows Server 2012 R2.

References:

https://technet.microsoft.com/en-us/windows-server-docs/identity/ad-fs/deployment/configure-a- federation-server-with-device-registration-service

https://technet.microsoft.com/en-us/windows-server-docs/identity/ad-fs/design/ad-fs-requirements

Question No.73

HOTSPOT

You have a server named Server1 that runs Windows Server 2016. Server1 has the Web Application Proxy role service installed.

You are publishing an application named App1 that will use Integrated Windows authentication as shown in the following graphic.

image

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

image

Correct Answer:

image

Question No.74

HOTSPOT

Your network contains an Active Directory domain named contoso.com. The domain contains four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2016.

Server1 and Server2 are nodes in a Hyper-V cluster named Cluster1. You have a highly available virtual machine named VM1. Server1 is the owner node of VM1. Server3 and Server4 are nodes of a scale-out file server named Cluster2.

The storage on Server1 is configured as shown in the following table.

image

VM1 is stored in C:\ClusterStorage\Volume1.

You need to move the virtual disk of VM1 to a different location. What should you do?

To answer, select the appropriate options in the answer area.

image

Correct Answer:

image

Question No.75

You have an Active Directory domain named contoso.com.

The computers in contoso.com are installed by using Windows Deployment Services.

You have a server named Server1 that runs Windows Server 2016. Server1 is a member of contoso.com. Server1 has the Hyper-V role installed. Virtual machines on Server1 are connected to an external switch named Switch1.

You create a virtual machine named VM1 on Server1 by running the following cmdlets.

image

You need to ensure that you can install the operating system on VM1 by using Windows Deployment Services.

What should you do?

  1. Add a legacy network adapter to VM1.

  2. Modify the SwitchType parameter of Switch1.

  3. Modify the DefaultFlowMinimumBandwidthWeigth parameter of Switch1.

  4. Add a SCSI controller to VM1.

Correct Answer: A

Explanation:

A legacy network adapter is required for PXE boot.

Not B: The switch is an External switch which is what is required.

Question No.76

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have a server named Server1 that runs Windows Server 2016. Server1 is configured as a VPN server.

Server1 is configured to allow domain users to establish VPN connections from 06:00 to 18:00 everyday of the week.

You need to ensure that domain users can establish VPN connections only between Monday and Friday.

Solution: From Server Manager, You modify the Access Policies on Server1. Does this meet the goal?

  1. Yes

  2. No

Correct Answer: A

Question No.77

HOTSPOT

Your network contains an Active Directory domain named contoso.com. The domain contains four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2016.

Server1 has IP Address Management (IPAM) installed. Server2, Server3, and Server 4 have the DHCP Server role installed. IPAM manages Server2, Server3, and Server4.

A domain user named User1 is a member of the groups shown in the following table.

image

Which actions can User1 perform?

To answer, select the appropriate options in the answer area.

image

Correct Answer:

image

Question No.78

Your network contains an Active directory forest named contoso.com. The forest has a Distributed File System (DFS) namespace named \\contoso.com\namespace1.

The domain contains a file server named Server1 that runs Windows Server 2016. You create a folder named Folder1 on Server1.

Which two cmdlets should you use? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

  1. New-DfsnFolderTarget

  2. Install-WindowsFeature

  3. Grant-DfsnAccess

  4. New-DfsnFolder

  5. New-SmbShare

Correct Answer: BC

Question No.79

You have a Hyper-V host that runs Windows Server 2016. The host contains a virtual machine named VM1. VM1 has resource metering enabled.

You need to use resource metering to track the amount of network traffic that VM1 sends to the 10.0.0.0/8 network.

Which cmdlet should you run?

  1. New-VMResourcePool

  2. Set-VMNetworkAdapter

  3. Add-VMNetworkAdapterAcl

  4. Set-VMNetworkAdapterRoutingDomainMapping

Correct Answer: C

Explanation:

https://technet.microsoft.com/itpro/powershell/windows/hyper-v/add-vmnetworkadapteracl

Question No.80

Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.

Start of repeated scenario

Your network contains an Active Directory domain named contoso.com. The functional level of the forest and the domain is Windows Server 2008 R2. All servers in the domain run Windows Server 2016 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10.

The domain contains nine servers that are configured as shown in the following table.

image

The virtual machines are configured as follows:

image

Each virtual machine has one virtual network adapter.

image

VM1 and VM2 are part of a Network Load Balancing (NLB) cluster.

image

All of the servers on the network can communicate with all of the virtual machines.

End of repeated scenario.

You plan to implement nested virtual machines on VM1. Which two features will you be prevented from using for VM1?

  1. NUMA spanning

  2. Smart Paging

  3. Dynamic Memory

  4. live migration

Correct Answer: C

Get Full Version of the Exam
70-743 Dumps
70-743 VCE and PDF

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.